1
1. Safety regulations
1.1 General
Observe the respectively applicable directives and regulations and the currently valid accident prevention regulations.
Cleantecs accepts no liability for any water damage that may occur.
Ensure that the application location has an adequate water drain.
Close the supply stopcock when the unit is shut down for longer periods (e.g. during the weekend).
1.2 Safety instructions in this operating and installation manual
Hazard warnings and very important information are labelled with a warning triangle symbol.
Notes are labelled with an information symbol.
1.3 Intended use
The unit can present hazards when it has been incorrectly
installed, is not regularly maintained or is
used inappropriately for other than the intended purpose.
This unit is only to be used for processing water in order to achieve an
optimum water quality for cleaning glass surfaces.
Any other use, especially the processing of water for
manufacturing foodstuffs (e.g. beverages), is regarded as inappropriate use
and is prohibited. The regulations of DIN1988/EN1717 apply to the installation.
1.4 Operating temperatures, pressures and connections
The system must be protected from frost. The temperature in the operating room must be at least 4°C.
The water temperature must not exceed 30°C and the operating pressure must not exceed 10 Bar.
The processed water can be more or less aggressive depending on the composition of the supply water. T
his means that parts coming into contact with the processed water must be made of suitable material.
1.5 Modifications and changes to the unit
Independent changes to the unit are not permitted for reasons of safety. Original parts and accessories
are specially designed for the unit.
The manufacturer accepts no liability of any kind for damage resulting from modifications to the unit
or from the use of non-original spare parts.
