9
8
4
Pouring
Clean the pitcher, funnel and lid periodically. Wash the pitcher, funnel and lid with a
clean sponge and mild kitchen detergent. Rinse thoroughly.
5. Replacing the Filter Cartridge (EJC3)
Pull upward to detach filter cartridge.
Dispose of used filter cartridges in accordance with local waste regulations.
Insert new filter cartridge and press into position. Follow installation instructions (pg.7)
Dispose the used cartridge or product in accordance with the garbage separation regulations instituted
by the relevant local authorities.
The filter cartridge replacement period is approximately 3 months, however, this period may vary based
on the amount of water used, water quality and the temperature of water filtered (colder water needs
longer filtering). In general, use your filter counter as a guide for replacement, but earlier replacement
is recommended in the following circumstances:
• When the odor or taste of chlorine is detected
• If the unit has not been used for a long period of time
6. Maintenance
Clean the pitcher, the funnel and the lid periodically.
●
Wash with a clean sponge and mild kitchen detergent, and then rinse off thoroughly. Failure to rinse
thoroughly may result in cracks or deteriorated water quality.
7. Specifications and Performance
Product Name
PITCHER SERIES
Model number
EJ105
EJ106
Material
Body: SAN (AS)
Cartridge: ABS
Lid: PP, ABS
Funnel: MBS
Filter components
Hollow fiber membrane, activated carbon
EJ105, EJ106 Performance Data Sheet
Cleansui Reduction Data
NSF/ANSI Standard Requirements
Substance
Overall persentage reduction
Influent challenge
concentration
Reduction requirement /
Maximum permissible product
water concentration
NSF/ANSI Standard 42 - Aesthetic Effects
Chlorine
97.4 %
2.0 mg/L ± 10 %
≧
50 %
NSF/ANSI Standard 53 - Health Effects
Cyst
> 99.99 %
minimum 50,000/L
99.95 %
Turbidity
99.1 %
11 ± 1 NTU
0.5 NTU
VOC
98.5 %
0.300 mg ± 10 %
95 %
Organic chemicals included by surrogate testing
Substance
Overall percentage
of reduction
Influent challenge
concentration mg/L
Maximum permissible
product
water concentration mg/L
alachlor
98.5%
0.050
0.001
atrazine
0.100
0.003
benzene
0.081
0.001
carbofuran
0.190
0.001
carbon tetrachloride
0.078
0.0018
chlorobenzene
0.077
0.001
chloropicrin
0.015
0.0002
2,4-D
0.110
0.0017
dibromochloropropane (DBCP)
0.052
0.00002
o-dichlorobenzene
0.080
0.001
p-dichlorobenzene
0.040
0.001
1,2-dichloroethane
0.088
0.0048
1,1-dichloroethylene
0.083
0.001
cis-1,2-dichloroethylene
0.170
0.0005
trans-1,2-dichloroethylene
0.086
0.001
1,2-dichloropropane
0.080
0.001
cis-1,3-dichloropropylene
0.079
0.001
dinoseb
0.170
0.0002
endrin
0.053
0.00059
ethylbenzene
0.088
0.001
ethylene dibromide (EDB)
0.044
0.00002
haloacetonitriles (HAN):
bromochloroacetonitrile
dibromoacetonitrile
dichloroacetonitrile
trichloroacetonitrile
0.022
0.024
0.0096
0.015
0.0005
0.0006
0.0002
0.0003
haloketones (HK):
1,1-dichloro-2-propanone
1,1,1-trichloro-2-propanone
0.0072
0.0082
0.0001
0.0003
heptachlor
0.025
0.00001
heptachlor epoxide
0.0107
0.0002
hexachlorobutadiene
0.044
0.001
hexachlorocyclopentadiene
0.060
0.000002
lindane
0.055
0.00001
Pour
Store in the
refrigerator
