CleanStar VBRO20, Instruction Manual

Page: 6 / 7

6
Cleanstar Pty Ltd
ABN: 51 121 002 104 ACN: 121 002 104
59 Radford Road, Reservoir VICTORIA 3073
Phone: (03) 9460 5655 Fax: (03) 9460 5666
Email: sales@cleanstar.com.au Web: www.cleanstar.com.au
CONDITIONS OF WARRANTY
This document outlines the terms and conditions of warranty for your Cleanstar product. This is an important document that
should be kept with your proof of purchase documents in a safe place for future reference should you require service for your
product.
Thank you for purchasing your new Cleanstar product. We are confident this product will give you trouble-free use and excellent service,
provided the operator uses and maintains the product in accordance with the Instruction Manual. Please read the Instruction Manual
carefully before using the product for correct operation and maintenance procedures, and store it in a safe place for future reference.
1. This is a parts and labour warranty against faulty or defective parts, materials or workmanship in manufacturing, when the product
is used and operated in accordance with the Instruction Manual.
2. This product carries a 12 month (1 year) warranty period that commences from the original date of purchase by the first
user/purchaser, and is not transferable.
3. This warranty only applies to products purchased and used in Australia.
4. At all times during the warranty period, Cleanstar shall, at its sole discretion, determine whether repair, replacement or refund will
apply if the product has a valid warranty claim applicable to it.
5. The repair or replacement of the product under this warranty does not extend the original period of warranty.
6. Please note that this warranty will be voided in the following cases (which are not exhaustive) and the warranty does not apply to
the cost of replacing any parts of the product resulting from:

Accidental damage;

Normal wear and tear;

Neglect, misuse or physical abuse by the operator, including failure to properly maintain or service;

Any alterations, modifications or tampering with the product without the prior written consent of Cleanstar;

Incomplete or improper installation;

Incorrect, improper or inappropriate operation;

Insect or vermin infestation;

Power surges, electrical storm damage or incorrect power supply/voltage;

Excessive use or use for which this product has not been designed;

Vacuuming up toner, powders, glass, hazardous, flammable or corrosive materials, plaster dust, concrete dust and other
similar building or construction materials;

Failure to comply with the operating instructions contained in the Manual supplied with the product;

If the product is rented;

If the product is used outside of Australia;