CleanStar VBP-BATT30, Instruction Manual

Page: 10 / 17

Using Your Vacuum
1. Ensure the battery pack is correctly assembled in the vacuum
2. Connect hose and telescopic tube if desired.
3. Correctly place shoulder straps on each shoulder and secure the waist band with hook
and loop strips. (Fig.16)
Caution: If the waist band and both Shoulder straps are not properly and securely in
place the unit could fall off your back causing damage or injury.
4. Turn the unit on by pressing the switch located near the base of the unit. (Fig.17)
Removing & Replacing Disposable Dust Bag
Important: DO NOT use the vacuum without all filters, cloth bag, and with or without
Disposable dust bag in place.
1. To remove the Disposable dust bag, press on the canister lid tabs on each side of the
unit and lift canister lid. (Fig.18)
2. Pull the tab on the HEPA dust bag holder out slightly and lift upwards.(Fig.19)
3. Holding the disposable dust bag in your hand, slide it out from the slots in the bag
holder .Hold carefully in order to avoid having dust fall out of disposable dust bag.(Fig19)
4. Replace the disposable dust bag with a new bag. Do not reuse the same vacuum bag.
5. The cardboard face of the new bag should rest securely in the dust bag cover
guides.
6. Place the cloth bag into the vacuum.