EN
22
Cleaning the Filter
1. Detach the dust container from the motor unit (see the "Attaching and Detaching Ac-
cessories" chapter, "Removing and Inserting the Dust Container" section).
2. Empty the dust container (see above).
3. Turn the lid of the dust container anticlockwise and remove it.
4. Carefully remove the cyclone
fi
lter (
E
) from the dust con-
tainer.
5. Remove the foam
fi
lter holder (
F
) from the cyclone
fi
lter.
6. Remove the foam
fi
lter (
G
) from the
fi
lter holder.
Please note: The thin fabric
fi
lter is
fi
rmly attached to the
fi
lter holder and cannot be taken out of the holder!
7. The cyclone
fi
lter can be taken apart to make it easier to
clean: Twist the inner cyclone insert a little in order to re-
lease it, and then remove it.
8. Tap out all the parts over a dustbin and brush off the loose
dirt.
9. You can wipe down the parts of the cyclone
fi
lter and the dust container with a damp
cloth.
10. If necessary, thoroughly rinse the foam
fi
lter and the
fi
lter holder with clear, lukewarm
water.
CAUTION:
Do not use any cleaning agent! Never wash in the dishwasher
or in the washing machine!
Then shake off any excess water and allow the
fi
lter and
fi
lter holder to
dry com-
pletely in the air
before reinserting them.
11. Once all parts are dry,
fi
rst assemble the cyclone
fi
lter. There are arrows marked on
both parts of the cyclone
fi
lter. Assemble the parts so that both arrows point towards
one another and then twist them
fi
rmly together.
12. Place the dry foam
fi
lter into the
fi
lter holder and then place this onto the cyclone
fi
lter.
CAUTION:
Under no circumstances should you assemble parts of the device
that are still damp!
13. Place the cyclone
fi
lter into the dust container. Make sure
that it is correctly recessed and can no longer be rotated.
14. Place the lid onto the dust container and twist it shut.
15. Attach the dust container to the motor unit.
Cleaning the Motor Unit, Nozzles and Telescopic Tube
• If necessary, clean the motor unit, nozzles and the telescopic tube using a slightly
damp, soft cloth. Dry them with a soft cloth.
• Remove hair and
fl
uff from the nozzles at regular intervals.
Storage
Store the device in a cool, dry place out of the reach of children and animals.
E
F
G
09668_de-gb-fr-nl_V1.indb 22
09668_de-gb-fr-nl_V1.indb 22
08.09.2015 16:28:59
08.09.2015 16:28:59
