23
EN
1. Remove the rechargeable battery from the device:
Push
the latch on the rechargeable battery (see photo) and
remove it.
2. Insert the rechargeable battery into the charging station.
3. First connect the barrel connector of the mains adapter
to the connector jack on the charging station and then to
a properly installed, easily accessible socket. The green
and the red control light on the charging station will be
illuminated. The rechargeable battery will be charged.
4. Let the rechargeable battery of the device charge for approx. 4 to 5 hours in order
to reach the maximum charge. If only the green control light is still illuminated, the
rechargeable battery has been fully charged.
5. First disconnect the mains adapter from the mains supply and then the barrel con-
nector from the charging station.
6. Remove the rechargeable battery from the charging station and insert it in the
device again.
Assembly
Attaching / Removing Nozzles
With the exception of the turbo nozzle (
9
), all nozzles are attached with the aid of the
nozzle adapter (
12
).
• Plug the nozzle adapter into the suction opening (
8
).
• If
desired,
fi
rst plug the extension tube into the suction opening and second the
nozzle adapter to the extension tube.
• Plug the nozzle you want onto the nozzle adapter.
• To take them apart, pull the nozzle and the adapter apart.
Attaching / Removing the Turbo Nozzle
No adapter is required for the turbo nozzle (
9
).
• It is plugged directly onto the suction opening (
8
). The catches must be heard to
engage in place. Attach the turbo nozzle to the extension tube in the same way.
• To detach it, press the release button and pull the turbo
nozzle or the articulated suction tube out at the same
time.
Removing / Inserting the Dust Container
•
Removing:
Twist the dust container (
7
) a little bit. It is re-
leased from the main unit (
3
) and can be removed.
•
Inserting:
Insert the dust container into the main unit. Ro-
tate it slightly as you do this until it engages in the main unit
correctly. Then twist the dust container in the main unit to
secure it in place. The release button of the dust container
must be located below the suction opening (
8
) after it has
been attached.
open
closed
