EN
18
Danger of Electric Shock from Water!
■
Use and store only in closed rooms.
■
Do not use the device in rooms with high humidity.
■
Should the device fall into water, switch off the power supply immediately. Do not at-
tempt to pull the device out of the water while it is still connected to the mains power!
■
Never touch the device, mains cable or mains plug with wet hands when these com-
ponents are connected to the mains power.
■
Never suck up liquids. Do not pour liquids into the dust container. Keep the motor
unit away from moisture or wet conditions!
Warning of Electric Shock from Damage and Inappropriate Use!
■
Only connect the device to a plug socket with safety contacts that is properly in-
stalled and matches the technical data of the device. The plug socket must also be
readily accessible after connection so that the connection to the mains can quickly
be isolated.
■
Only use suitable extension cables whose technical data is the same as that of the
device.
■
Remove the mains plug from the plug socket if a fault occurs during operation or
before a thunderstorm.
■
The device must be switched off when inserting or removing the mains plug. Always
pull the mains plug and never the mains cable to disconnect the device from the
mains power.
Warning of Fire!
■
Do not use the device in rooms containing easily ignitable substances or poisonous
and explosive fumes.
■
Do not use the device in the vicinity of highly
fl
ammable materials (curtains, textiles,
etc.).
■
Do not cover the device during operation in order to prevent it from catching
fi
re. Do
not insert anything into the openings of the device and make sure that these do not
become clogged.
■
In the event of a
fi
re: Do not extinguish with water! Smother the
fl
ames with a
fi
re-
proof blanket or a suitable
fi
re extinguisher.
Risk of Damage to Material and Property
■
Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces. Do not wrap the mains cable around
the device (danger of the cable breaking).
■
The device should only be used if it has been completely and correctly assembled!
The dust container and the
fi
lters must be inserted and must not be damaged.
If the dirt were to get inside the motor unit, this could damage the motor.
■
Note the
MAX
marking on the dust container. If during use the marking is reached,
empty the dust container. The
fi
lters must also be regularly cleaned in order to pre-
vent overloading of the motor.
07023_DE-EN-FR-NL_A5_V1.indb 18
07023_DE-EN-FR-NL_A5_V1.indb 18
04.08.2017 10:35:48
04.08.2017 10:35:48
