HOW TO USE ATTACHMENT TOOL
WITH ATTACHMENT TOOL: (effectively)
12
Press the lever to open the valve
valve lever
Press the lever to open the
valve during pull strokes
HOW TO
BETTER TECHNIQUE WILL HELP WITH DRY TIME, CARPET LIFE, AND OVERALL COST.
1. To clean, Pull the tool over the carpet with solution control valve lever pressed. (image 14.2, 14.1)
Press the lever only while pulling back on the wand. (image 14.3, 14.2) Pull the tool with the valve lever pressed
to insure the best results.
2. Release the solution control valve lever (image 14.4, 14.1) and pass the tool over the dampened area once or
twice by pulling or pushing the tool back and forth. Repeat the procedure if necessary.
NOTE: The weight of the tool and the vacuum suction are sufficient to obtain idea results. Additional physical
pressure is unnecessary.
Continue cleaning until the recovery tank becomes full (or whenever the job is done).
image 14.3
image 14.4
image 14.1
image 14.2
Summary of Contents for CF-100 Series
Page 2: ......