To obtain the best results from you new appliance, please
read and follow these instructions carefully. Always use
manufactures recommended cleaning and care products
with this machine. Our experience shows that difficulties
with the machine and poor cleaning results, are as a direct
consequence of using non-suitable cleaning and care
products.
Safety instructions, Safety précautions
English 6
Description of pictures, Technical Specification
English 7
TW 350 S, TW 600
Spray extraction operations
English 8
Preparatory steps before using the machine
English 8
Starting up the machine, Operating procédure
English 8
Maintenance / servicing
English 8
Faults
English 8
Final remark
English 8
Environmental protection
English 9
Daclaration of Conformity
English 9
●
This device is designed for commercial use suitable,
for example in hotels, schools, hospitals, Factories,
shops, offices and rental shops.
●
This equipment is not intended to be used by persons
(including children) with restricted physical, sensory or
mental abilities or who have no experience and/or
knowledge of its use, unless supervised by a person
who is responsible for their safety, or they have
received instructions from this person on how to use
the equipment.
Children should be monitored in order to ensure that
they do not play with the equipment.
●
Before using, check the data plate on the machine
and make sure that the machine is connected to the
correect electrical supply!
●
This machine is not suitable for vacuuming dust
particles representing a health hazzard.
●
Watch out to other persons whilst operating the
machine, especially children. Small children must not
be permitted to crawl on the dmp carpet.
●
Only use manufactures recommended cleaning and
care agents, the dilution of each product is printed on
the label. Never use cleaning and care agents
containing solvents!
●
Never vacuum any explosive, flammable, toxic or
dangerous substances!
●
Do regularly check the electrical cables and
connectors for damage!
●
Ensure that the cable is not damaged (heat, oil, sharp
corners, rough surfaces etc.)!
●
Never
pull or carry the machine by it's electrical
cable!
●
The machine must be unplugged from the mains
when being cleaned or serviced, when parts are being
changed or when converting to a different function.
●
The machine must not be used if the mains supply
cable is not in a serviceable condition.
●
Never
remove the plug with wet hands or by pulling
the cable!
●
The instructions of the manufacturer must be
complied with when replacing the mains supply cable
or appliance connectons.
●
TW 350 S, TW 600 are to be protected by a circuit
breaker type H with a rated current of 10A or a 10A
fuse.
●
Take care that the mains supply cable is not damaged
in any way by being run over, crushed or torn, etc.
●
The mains supply cable is to be regulary inspected for
signs of damage or aging.
●
Faulty mains cables are only to be replaced by PVC
flexible sheathed cable 3x1 MM2 H05VV-F according
to DIN 58281/VDE 0281 with variations according to
VDE 0700 part 205.
●
Couplings for mains or appliance connecter leads
must at least comply with the standards for
splashproof models.
●
Do pay attention to re-filling procedures, if not, water
could enter the vacuum motor and cause damage!
●
Do not use the machine in direct proximity of heat
sources (fire, gas or electrical stoves etc.)!
●
To avoid deformation of the material, never store the
machine near radiators etc.!
●
Store machine in dry place and keep away from
water / sprinklers!
●
Remove filtre on the tube inside of the machine for
cleaning, never use the machine without replacing
filtre!
●
For machines using a float assy, check regulary
and replace as necessary!
●
There is a danger of scalding when using manuel
nozzles with spraying agent températures of over 50°C.
●
Overhauls, including the splicing of spraying agent
supply lines and hoses, may only be carried out by
certified customer service stations or by specialists in
this particular field who are familiar with all the
relevant safety précautions.
●
Repairs may only be undertaken by authorised
service agents!
●
Only use original accessories and spare parts!
●
If an extension cable is used, make sure that it comp-
lies with the relevant safety standards!
●
If the machine is stored or transported in
temperatures below freezing, empty all water tanks to
avoid
frost damage!
☞
the machine has suffered any external damage
☞
cables or hose are damaged
☞
the possibility of damage after droping the machine is
given
☞
the machine leaks.
☞
before re-filling with water,
☞
when it is not in use,
☞
before cleaning and maintaining,
☞
when leaving unattended.
Never use the soil extraction method unless you have
verified that the textile floor covering and the floor itself will
suffer no damage.
Special care is required with:
☞
Floors which can be damaged by water (e.g. wood
floors and floors of similar material).
☞
Carpeting secured with adhesive which is not water
résistent.
☞
Carpeting which is only partially glued down.
☞
Carpets having a backing fabric sensitive to water
(e.g. jute or jute blends).
☞
Carpets which are not colour-fast.
Test colour
fastness in a concealed spot.
The manufacturer accepts no liability in the case of
improper use.
Contents
Safety instructions
Read these instructions
carefully before operating
the machine!
Never operate when:
Always unplug appliance:
Safety précautions
Summary of Contents for TW 350 S
