Copyright ©2006 by Cleanfix Cleaning Systems Inc., 465 West Main St., Wyckoff, NJ 07481.
All rights reserved. Content is subject to change.
GROUNDING INSTRUCTIONS - 120 VOLT
Improper use of the grounding plug can result in
a risk of electric shock.
Electrical equipment must be grounded. If it
should malfunction or breakdown, grounding
provides a path of least resistance for electrical
current to reduce the risk of electric shock.
The unit is equipped with a cord having
equipment grounding conductor and grounding
plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
If repair or replacement is necessary, DO NOT
connect the grounded wire to either flat blade
terminal. The wire with insulation having an
outer surface that is green with or without yellow
stripes is the grounding wire.
GROUNDING METHODS
This electric equipment is for use on a nominal
120-volt circuit and has a grounded plug that
looks like the plug illustrated in (Fig. A). A
temporary adaptor that looks like the adaptor
illustrated in (Fig. B & C) may be used to
connect this plug to a 2-pole receptacle as
shown in (Fig. B) if a properly grounded outlet is
not available.
The temporary adaptor should be used only until
a properly grounded outlet (Fig. A) can be
installed by a qualified electrician. The green
color rigid ear, lug or the like extending from the
adaptor must be connected to a permanent
ground such as a properly grounded outlet box
cover. Whenever the adaptor is used, it must be
held in place by a metal screw.
Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
