background image

Safety, Operation and Maintenance Manual for Parrot (RA 300 E); Version 1.2 

3

 

GENERAL PRECAUTIONS (continued) 

 

 

Do not use an extension cord unless 
absolutely necessary. If an extension cord is 
used, the wire size must be 14 ga. or larger and 
should not exceed 50 feet in length. The 
extension cord must be three-wire type to 
insure grounding protection. 

  Replace damaged or worn parts immediately 

with genuine original equipment parts to 
maintain safety and to protect your limited 
warranty. 

 

Do not run pump dry. When solution tank is 
empty, turn off the pump. 

 

Do not put any objects into openings. Do not 
use with any opening blocked; keep free of 
anything that may reduce air flow. 

 

Keep hair, loose clothing, fingers, and all parts 
of body away from openings and moving parts. 

 

NEVER drive scrubber over steps. 

 
 
 
CARE OF THE SCRUBBER 

 
This scrubber is designed to be safe when used to 
perform cleaning functions as specified. Should 
damage occur to electrical parts, the unit should 
NOT be used until the damage is repaired by the 
manufacturer of an authorized service center. This 
will avoid further damage to the scrubber or injury 
to the user. 

These instructions are for your protection and 
information. 
 
PLEASE READ CAREFULLY! Failure to follow 
instructions or precautions could result in injury or 
damage to the user and/or the scrubber.  

SAVE THESE INSTRUCTIONS! 

 
 
 
GROUNDING INSTRUCTIONS - 120 VOLT 
 

Electrical equipment must be grounded. If it should 
malfunction or breakdown, grounding provides a 
path of least resistance for electrical current to 
reduce the risk of electric shock. 
 
The scrubber is equipped with a cord having 
equipment grounding conductor and grounding 
plug.  
 

The plug must be inserted into an appropriate outlet 
that is properly installed and grounded in 
accordance with all local codes and ordinances. 
 
If repair or replacement of the cord or plug is 
necessary,  DO NOT connect the grounded wire to 
either flat blade terminal. The wire with insulation 
having an outer surface that is green with or without 
yellow stripes is the grounding wire. 

 

 
 

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. 
Check with a qualified electrician or service person if you are in doubt as to whether the outlet is 

properly grounded. 

Do not modify the plug provided with the equipment. If it will not fit the outlet, have a proper 

outlet installed by a qualified electrician. 

 

Note: In Canada, the use of a temporary adapter is not permitted by the  

Canadian Electrical Code.

 

WARNING 

Summary of Contents for Parrot RA 300 E












Reviews: