- MAINTENANCE / SERVICING -
Service
For repairs, please contact your specialist wholesaler or one of the service shops.
You will be expertly and quickly served.
Our products have been tested for safety at the factory. To ensure operational safety and maintain the
specified performance values, an inspection should be carried out once a year. The inspection may be
performed only by our Support Department or authorised professionals.
This machine is only intended for use on level surfaces with a maximum gradient of up to 2%.
This machine is not approved for use on public paths and roads.
Servicing instructions
The following instructions should be observed:
When cleaning and servicing the machine, replacing parts or when changing over to a different function,
switch off the drive and remove the plug.
The power supply lead must not be damaged by driving over it, crushing, tugging etc.
Check the power supply lead regularly for signs of damage.
The machine must not be used if the power supply lead is not in perfect condition.
When using or replacing the power supply or equipment supply leads, use only those specified by the
manufacturer.
When replacing the plug-and-socket connectors of power supply or equipment supply leads, splash
protection and mechanical strength must be assured.
When transporting the machine in lifts, put the shaft/bar in a vertical position so that it cannot catch
on the lift walls.
The shaft/bar is automatically secured against recoil by the patented shaft/bar adjustment unit.
Only the spray and cleaning agents suitable for the machine’s purpose may be used.
Never use highly flammable, combustible, toxic, health-hazardous, corrosive or irritant substances.
Repairs, including the fitting of spray agent lines and hoses, may only be carried out by approved customer
service shops or by specialists in this field who are familiar with all the relevant safety regulations.
Storage
When the machine is not being used, store it in a dry place and in normal room conditions (
not below 0°C
).
18 | English
