Machine use
Press the switch lock (3).
Press the brush motor switch (2) (to the right or left). The motor starts.
If you raise the bar (6) slightly, the machine moves to the right .
If you lower the bar (6), the machine moves to the left.
If you keep the bar (6) in its central position, the machine works on the spot.
After use
Squeeze the shaft adjustment handle (4) and shift the bar (6) into its vertical position.
Then tip the machine onto its wheels (10) and press the brush motor switch (2). briefly.
The accessory disengages.
Remove the plug from the power socket and wind the electric cable (12) around the handle bar (1) and
cable hook (8).
Precautions to be taken when changing the brushes PADS
Disconnect the power cable from the mains.
Caution when tilting the unit.
Thorough cleaning with PowerDisc LS + HD
For thorough cleaning, the single-disc machine is supplied with the following accessories:
Liquid tank (15) Scrubbing brush (20) or drive plate (21) with black pad (22).
Fasten the tank to the mounting (7).
Slide the outlet hose (17 onto the water connector.
Fill the tank (15). Then fit the brush or drive plate with pad.
Control the flow of liquid with the tank lever (16), by pulling the lever (16) upwards.
Vacuum the dirty wash solution a section at a time with a water extractor.
Shampooing with PowerDisc LS + HD
For shampooing, the machine is equipped with the following accessories:
Liquid tank; 0.3 Perlon shampooing brush or Sapur pad for textile floor coverings.
The working procedure is in principle the same as for thorough cleaning.
Start the machine with the shampooing brush dry.
Meter a small amount of liquid until the bristles are saturated with foam.
Run the machine with the rotating brush from right to left or vice-versa.
Immediately after this, run the machine in the same way in the reverse direction, but with
an overlap of about a quarter of the strip already treated (C). Only then run the machine in a
spiral pattern over the shampooed strips.
In doing so, work both strips at the same time (D). During shampooing it is highly advisable
to immediately remove the dirt-laden foam a section at a time with a water extractor.
Let the carpet dry before walking on it.
16 |
20
1
A
B
®
®
4
3
2
2
6
®
6
®
C
D
C
D
English