Page 7 of 11
PATTERN MARKS
- - - - - - - INDICATE
THE AREA TO BE
CUT OUT ON THE
LEFT END OF THE
ULTRA-LOW.
6.
Place the Ultra-Low as shown in Figure 4. Use a tape measure and transfer the shape of the inside
of the tub edge to the Ultra-Low. The inside of the tub may be irregular in shape, so measurements
for the inside line must be made every 3” from one end of the CleanCut Ultra-Low to the other.
Once completed, use your yard stick and marker to connect the markings for the inside line.
Alternate Method:
You may use cardstock paper such as done with the sides to create a bottom template.
FIGURE 3
SIDE VIEW OF
LEFT END OF
ULTRA-LOW
1”
FIGURE 4
