CleanCraft 7103662 Operating Instructions Manual Download Page 6

6

HDR-K Series | Version 1.03

Safety

- Do not bend or reach over the exhaust opening. Do 

not touch the boiler during burner operation. (Risk 
of burns).

- Avoid contact of the skin and especially the eyes 

with the cleaning agent! After eye contact, rinse im-
mediately with plenty of water and seek medical at-
tention immediately!

RISK OF EXPLOSION! 

DO NOT use the device to spray 

flammable liquids!

- DO NOT change the original diameter of the nozzle.
- Only use original spare parts and accessories to 

avoid possible dangers and accident risks.

2.6 Safety labels on the high pressure washer

The following safety labels and instructions are attached 
to the High Pressure Washer (Fig. 1) and must be ob-
served. 

Fig. 1: Safety labels

If safety labels on the machine are damaged or missing, 
this can cause errors, personal injury and material dam-
age. The safety symbols attached to the machine must 
not be removed. Damaged safety symbols must be re-
placed immediately.

As soon as the signs are not clearly visible and compre-
hensible at first glance, the machine must be stopped 
until new signs have been attached. 

ATTENTION!

The exhaust gas of the engine contains toxic car-
bon monoxide. Do not run in a closed area.

ATTENTION!

When directed towards tyres, tyre valves or other 
pressurised components, the high pressure jet is 
potentially dangerous. Do not use the rotating nozzle 
kit, and always keep the jet at a distance of at least 
30 cm during cleaning.

ATTENTION!

COMPLY WITH the local water supply authority regu-
lations.
Under IEC 60335-2-79, the appliance may only be 
connected to the mains drinking water supply if the 
supply hose is fitted with a backflow preventer valve 
with drain facility corresponding to EN 12729 type 
BA. The backflow preventer can be ordered from the 
manufacturer.

ACHTUNG!

Water that has passed through backflow preventers 
is considered to be non-potable.

ATTENTION!

Only the fuel specified in the operating instructions 
may be used. If unsuitable fuels are used, there is a 
risk of explosion. When refuelling petrol-driven 
appliances, make sure that no fuel gets onto hot sur-
faces.

ATTENTION!

DO NOT tamper with or adjust the setting of the 
safety valve or the safety devices.

ATTENTION!

If the device is operated in rooms, sufficient ventila-
tion and exhaust gas discharge must be provided 
(danger of toxication).
The exhaust opening must not be closed. It must be 
ensured that no exhaust emissions occur in the vici-
nity of air inlets.

WARNING!

Never leave the running machine unattended. 
Always unplug the machine when it is not in use and 
keep it out of the reach of children or irresponsible 
persons.

ATTENTION!

This device is designed for use with the detergent 
supplied or recommended by the manufacturer. The 
use of other detergents or chemicals may adversely 
affect the device’s safety.

Summary of Contents for 7103662























Reviews: