JINHCN05 RevE 22/07/14
General Guidance
It is important that your stove is correctly installed
as Cleanburn Stoves cannot accept responsibility
for any fault arising through incorrect use or
installation.
These instructions cover the basic principles to
ensure satisfactory installation of the stove,
although detail may need slight modification to
suit particular local site conditions.
The installation must comply with current Building
Regulations, national and European standards,
Local Authority byelaws and other specifications or
regulations as they affect the installation of the
stove.
The Building Regulations requirements may also be
met by adopting the relevant recommendations in
the current issues of British Standards BS 8303 and
BS EN 15287-1.
C
OMPETENT
P
ERSONS
S
CHEME
Cleanburn Stoves recommend that this stove is
installed by a member of an accredited competent
persons scheme e.g. HETAS.
If the installer is not a member of a competent
persons scheme, it is a legal requirement to notify
your local building control body in advance of any
work starting.
H
EALTH AND
S
AFETY
P
RECAUTIONS
Special care must be taken when installing the
stove such that the requirements of the Health and
Safety at Work Act are met.
H
ANDLING
Adequate facilities must be available for loading,
unloading and site handling.
F
IRE
C
EMENT
Some types of fire cement are caustic and should
not be allowed to come into contact with the skin.
In case of contact, wash immediately with plenty
of water.
A
SBESTOS
This stove contains no asbestos. If there is a
possibility of disturbing any asbestos in the course
of installation then please seek specialist guidance
and use appropriate protective equipment.
M
ETAL
P
ARTS
When installing or servicing this stove, care should
be taken to avoid the possibility of personal injury.
M
ODIFICATION
No unauthorized modification of this appliance
should be carried out.
Safety
WARNING –
This appliance will be hot when in
operation and due care should be taken. The
supplied gloves may be used to open the door and
operate the air controls.
A
EROSOLS
Do not use an aerosol spray on or near the stove
when it is alight.
F
IREGUARDS
Always use a fireguard in the presence of children,
the elderly or the infirm. The fireguard should be
manufactured in accordance with BS8423 –
Fireguards for use with solid fuel appliances.
D
O
N
OT
O
VER
-F
IRE
It is possible to fire the stove beyond its design
capacity. This could damage the stove so watch for
signs of over-firing. If any part of the stove starts
to glow red, the stove is in an over-fire situation
and the controls should be adjusted accordingly.
Never leave the stove unattended for long periods
without first adjusting the controls to a safe
setting. Careful air supply control should be
exercised at all times.
F
UME
E
MISSION
Properly installed and operated, this appliance will
not emit fumes. Occasional fumes from de-ashing
and refueling may occur. Persistent fume emission
must not be tolerated.
This appliance should not be operated with the
doors open
If fume emission does persist then the following
action should be taken immediately;
Open Doors and windows to ventilate room.
Let the fire out, or eject and safely dispose of
fuel from the appliance.
