38
OPERATIONS MANUAL
39
RHINO-MAT
The following list of tips has been created to provide operators of Rhino-Mat
effective ways to work out the older more soiled in stains. By employing the
techniques and information provided below, operators will be able to maximize
on Rhino-Mat’s full potential to provide a completed product matched by no
other machine on the market.
Due to the brush only being able to spin in one direction, mats of certain
materials or those that are stained very heavily, may not always come out
as clean as is possible on the first run. The different grades of the fibers
will sometimes lead to only one side being cleaned.
It is highly recommended that these particular mats be turned 180
degrees so that the brush is able to spin against the opposite side
of the fibers thus enabling a more thorough cleaning. Even for those
mats that come out looking clean, can get cleaner by utilizing this
method.
Using the chemical injection system may not always be the most effective
choice depending on the recommended dilution of the cleaning solution
being used. Tougher stains may require a more concentrated application
of solution in order to be lifted out.
In some cases, pre-treatment may be required in order to thoroughly
remove the more stubborn stains. (Please note: it is highly
recommended that a low foam or a non-foaming upholstery cleaner
be used.)
Depending on the materials that some mats consist of, they may not
always come out as dry as is possible.
All Rhino-Mat systems come equipped with “Water On-Off” toggle
switches. In the event that mats come out feeling moist or wet to
the touch, switch the water off and run the mat through again to dry
completely.
Guide to Maximizing Rhino-Mat’s
Washing and Drying
Hot water will always help. While the effectiveness of Rhino-Mat System
lies primarily in patented technology, the application of hot water will
always boost the quality of the end product that Rhino-Mat is able to
provide. If a warm water line is available, capitalize on Rhino-Mat’s
effective technology coupled with the cleaning power of hot water.
Depending on the materials that some mats consist of, they may not
always come out as dry as is possible.
All Rhino-Mat systems come equipped with “Water On-Off” toggle
switches. In the event that mats come out feeling moist or wet to
the touch, switch the water off and run the mat through again to dry
completely.
Hot water will always help. While the effectiveness of Rhino-Mat System
lies primarily in patented technology, the application of hot water will
always boost the quality of the end product that Rhino-Mat is able to
provide. If a warm water line is available, capitalize on Rhino-Mat’s
effective technology coupled with the cleaning power of hot water.