Terminator Iron Filter Installation & Startup Guide
Page 9
www.cleanwaterstore.com
Rev 042414
pipe-joint compound, Teflon tape, or Vaseline or other petroleum greases to lubricate tank threads.
Please Note: When installing Fleck 2510 backwash control-timer valve on to the top of the filter
tank, do not over-tighten. Tighten by hand.
The control valve is sealed with the o-ring on the base of
the control valve. Once you hand-tighten it so the o-ring has sealed against the top of the tank,
continue to tighten for perhaps another 1/4 turn until tight. If the control valve is over-tightened and
leaks, the black Slip Ring will need to be replaced.
8.
See how the Fleck by-pass is connected. Make sure the by-pass valve is in the bypass position when
starting the installation. Follow the IN and OUT arrows on the bypass valve and control valve for
proper connection of in and out water piping. Leave in the BY-PASS position for now.
Fig 5
