7500-S Sediment Filter Installation & Startup Guide
Page 4
www.cleanwaterstore.com
Rev 083016
Manual/ Return
Button: Second from left, button icon is a “pointing index finger” with a left‐
pointing arrow underneath.
After unlocking the display, pressing this button in Service Mode (Dynamic Display Stripe is
running) will start a backwash cycle.
Pressing this button when in Program Mode will return you to the Service Mode.
A. Time of day indicator
• When the blue Clock Icon is lit, the digital display is showing the current time. That time is
displayed in 24‐hour format, i.e. 13:00 is 1:00 pm.
B. Button lock indicator
• When the b Key Icon is lit, the buttons are locked. Press and hold both the Up and Down
arrows to unlock. Buttons will lock 60 seconds after the last time a button is pressed.
C. Program mode indicator
(shown on drawing as Enquiry/ Setting) is the Blue Wrench Icon. To
activate this Icon from Service Mode, press and release the Menu/Confirm button (button on
far left, with a square and an arrow pointing left) and the green Wrench Icon will be lit.
• When the green Wrench Icon is flashing, whatever parameter that is selected (set clock time,
set cycle step, etc.) can now be adjusted by using the Scroll buttons.
For example, when you press it the first time, the Dynamic Service Stripe goes away, the Green
Wrench Icon is lit, and the other icon that is lit is the Blue Clock Icon‐ that means that whatever
digits are on the red display, they are stating the clock time (in 24 hour mode).
