Clean Water Systems 5900S, Installation & Start?Up Manual

Page: 12 / 22

5900S Softener Installation & Startup Guide
Page 12 www.cleanwaterstore.com Rev 071218
Program Your Softener Control
Enter main menu by pressing
the Menu/Enter button
(Time of
day will flash)
Set current time of day
by pressing
the Set / Change button (the first digit will
begin to flash)
To change digit value, press the Set/Change
button to accept the digit press the
Menu/Enter button (Next digit will flash)
Once the hour is entered, all digits will flash.
With all digits flashing press the Menu
Button to set A.M. or P.M. Once A.M./P.M.
is accepted the next menu item will flash
To Set the Hardness Press the Set/Change Button
To change digit value press the Set/Change button Example [ H - 10 ]
To accept the digit value press the Menu/Enter button (Next digit will flash)
Once the last digit is accepted all digits will flash
Note: you need to know what the hardness level of your water is in Grains Per Gallon. If you don’t
know, we do include a hardness test kit with each order.
5. To exit menu press the Menu/Enter button. Note: If no buttons are pressed for 60 seconds or
longer the menu will automatically be exited.
Pressing and holding the Menu/Enter button will also access some options:
Flo - this is the flow rate, if water is running, it will display the volume, in gallons per minute.
Gt r This the total # of gallons that has gone through the filter.
g tot This is the same as the previous.
rC r This is the number of regenerations done.
rC This is the total number of regenerations done as rCr.
gPdL This shows how many gallons used each day.
Gbrl This shows the gallons used between regenerations.
PfDL This shows peak, or highest flow rate that has passed through the filter in the last 24 hours.