3
1.0
General Product & Safety Information
1.1
Product Information
The CRD130 Tubing Cutter is designed to cut flexible tubing (including heatshrink) up to
90 durometer, shore A, including any non-metallic braided materials. The cutter will
cut a maximum diameter of 3/4”
The minimum/maximum cut lengths range from 5/8” to 24” long. All lengths within that
range can be achieved within plus/minus .030” tolerance utilizing the slide block and
scale.
1.2
Safety Information
This product uses a chevron blade cutting knife that is extremely sharp. Use care when
opening the cutter handle.
Replacements blades are available from Clean Room Devices, Inc.
Pay close attention to where your hands are when the cutter is open as the
cutter blade is exposed and is extremely sharp.
When the cutter is not in use keep the the cutter handle closed.
2.0
Installation
Ensure all four (4) rubber feet are completely stabilized on your work surface prior to
using the cutter. The cutter is to be place on a flat even surface.
WARNING
