Clean Island Breathing 1500/3000 Portable Air Filtration System Manual 2014
OPERATING YOUR CLEAN ISLAND BREATHING
HEPA AIR FILTRATION SYSTEM
OPERATION
1. Place the unit in the area where you want the cleanest air.
2. Plug the electrical cord provided into a compatible grounded outlet.
3. To operate, select the desired speed by pressing firmly on one of the buttons marked
“HIGH”, “MEDIUM” or “SILENT”. The appropriate green LED light will illuminate and 3
red LED lights will indicate active stage filtration.
4. To stop the unit operation, press firmly on the button marked “OFF”.
FILTER LIGHT INDICATORS
Your HEPA system is equipped with an electronic filter timer. This timer monitors the life
expectancy of each filter in the unit. By default, the Pre-Filter, HEPA Filter and V.O.C.
Blanket lights will turn on when the unit is powered on.
If you have upgraded your V.O.C. Blanket to a V.O.C. Canister, you must activate the
corresponding timer.
- Press and hold the V.O.C. Canister button until the light comes on. The V.O.C. Blanket
light will automatically go off. The control panel will now monitor the life expectancy of
the V.O.C. Canister.
If you are switching your V.O.C. Canister to a V.O.C. Blanket, you must
activate the corresponding timer.
- Press and hold the V.O.C. Blanket button until the light comes on. The V.O.C. Canister
light will automatically go off.
The control panel will now monitor the life expectancy of the V.O.C. Blanket.
When a filter indicator light flashes, it is time to check and replace that filter.
- Turn the unit off and see instructions for “filter removal” to determine if filter replacement
is needed. See ‘Maintenance” on next page.
Once the filters have been checked or replaced, turn the unit back on and reset the
control panel.
- To reset, press and hold the flashing filter button until the light is constant.
CAUTION
1. Make sure the cord is not in the path of people walking or where anything can be rolled
over it.
2. Do not place any objects on top of the unit or allow anyone to sit on it.
3. NEVER place any liquids or plants on the unit. Moisture could leak into the unit and
damage the filter media or electrical components.
4. The air filtration system discharges the cleaned air through the vents near the bottom
on four of the six sides. On “HIGH” the velocity of the air coming out is high to enhance
circulation throughout the area being cleaned. If the airflow is bothersome or creates a
draft, turn the unit until the air is directed toward an unoccupied area of the room.
