background image

Installation, Operation & Maintenance Guide

 

FC-400 Series 

6

1-888-MY-AIR11        CAG-06-21-003        AtmosAir.com

Electrical Installation

 

AtmosAir FC-400 series systems require an average of 4.5 watts per unit. 

 

Follow proper electrical procedures, guidelines, and codes for providing power supplies to the systems.

 Including 

requirements for conduit, sufficient ampacity, phase balancing, etc. Electrical installation should be performed by a qualified 

electrician.

 

Field-install a power plug outlet or power receptacle within 1.83 meters (6’) of the unit(s).

 

■ Each FC-400 series unit is shipped with an 2.44 meters (8’) power cord with a field install pair of wire hot/neutral connector on 

one end and a quick-disconnect plug on the other end. The FC-400FM has a polarized quick-disconnect on the unit. Each unit is 

shipped with two wiring options per country-specific requirements:

1. 

Two-conductor, field wire connection (No Ground)

2. 

NEMA 5-15 two-prong plug adapter

Caution!

A non-functioning LED light may improperly indicate that the system is not functioning. Be sure to disconnect from the main power before performing 

maintenance or troubleshooting the system.

!!!WARNING!!!

THE SECONDARY VOLTAGE TO THE IONIZATION TUBE CAN BE AS HIGH AS

3000 VOLTS AC. DO NOT CONNECT TO POWER BEFORE THE INSTALLATION IS COMPLETE

 AND ALL PERSONNEL ARE AWARE OF IMMINENT OPERATION. ALWAYS DISCONNECT 

POWER TO THE UNIT BEFORE HANDLING ANY OF THE COMPONENTS.

Summary of Contents for AtmosAir FC-400 Series
















Reviews: