Cleamix VCS-100Cr, User Manual, Page: 23 / 34

Cr 2021-01-02 vs. 2.3 User Manual for VCS-100Cr
22
Buttons on right the side:
START Press to start the decontamination process
PAUSE Press to pause the decontamination process
STOP Press to stop the decontamination process
EXTENSIONS External Units and CAT’s
SELF CHECK Run the self-check process
Date and time can be edited by pressing the text on the upper edge. Pause the
decontamination process by pressing Pause, if there is need to change the hydrogen
peroxide bottle. When the bottle is changed, continue the decontamination process by
pressing again
Pause .
Extensions and Info page shows the information about the Master unit and the additional
Extension Units and CAT’s .
Each Ext has it’s own ID. The ID’s last four numbers are the same as the last four numbers
in the Ext serial number, that can be found on the device’s register plate. From the ID you
can recognize the external units from each other.
ID’s for the CAT’s and the Ext can be modified by clicking the cell. ID-numbers has to be
something between 100 and 65
000.
The ID-numbers 1...99 has special functions:
1: The information of Extension Unit is shown
2...99: For future extensions
Table of the Extensions shows the state of the device: whether it’s heating, producing gas
or cooling down.
Extensions and Info