Cleamix VCS-100Cr, User Manual, Page: 13 / 34

Cr 2021-01-02 vs. 2.3 User Manual for VCS-100Cr
12
Prior to decontamination:
1.
Make sure the room has been properly cleaned.
2.
No loose items are accepted in the decontamination space.
3.
Open drawers and reposition items to decontaminate as much as possible.
4.
For optimal air circulation, use additional fans securing vapour distribution. It is
a good idea to place one additional fan next to the decontamination unit to blow
from the unit’s air input towards the vapour output. This will improve the
efficient vapour circulation and the ventilation of the unit especially in a warm
weather conditions.
5.
Position indicators to places challenging for the hydrogen peroxide vapour to
reach.
6.
Cover/close fire alarms (find out proper procedures).
7.
Seal ventilation, possible valves and holes.
8.
Make sure there is no vapour leaking outside.
9.
Hydrogen peroxide sensing devices are used to monitor the surrounding area
during the decontamination cycle.
10.
Keep the area clear from visitors.
11.
Use warning signs in addition to upfront informing.
12.
Position the device on a levelled surface in a central location so that the vapour
can spread freely into the space.
13.
Remove cushion from the case, it absorbs hydrogen peroxide.
Power cord
Plug in the power cord by pressing and rotating the socket clockwise to lock to the desired
position. Power cord is detached by lifting the latch and turning the socket counter-clockwise
until it gets loose.
Sensor
Attach the hydrogen peroxide sensor to the unit so that the two red dots are facing each
other and press to lock. The sensor is detached by lifting it up with some force. Place the
sensor far enough from the unit. Remove the protective cap from the sensor.
Power
Turn on the device by pressing the power switch. The switch will lighten up.
Hydrogen peroxide bottle
Remove the cap of the hydrogen peroxide bottle and replace it with ventilated cap. Attach
the suction hoses properly to the bottle by pressing until you hear the sound of the locking
system.
Cleamix VCS-100Cr Operation