background image

TABLE OF CONTENTS

Repair or Warranty Contact

 

Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084

WH-4 

www.DustlessMadeSimple.com

 • 

[email protected]

Page 2

Applications & Environments ...............................................................................................3

What’s In the Box ................................................................................................................3

Specifications & Requirements

............................................................................................3

Getting Started ....................................................................................................................4

Compressed Air Fittings ......................................................................................................6

Before Each Use .................................................................................................................6

Bag Filter Change................................................................................................................7

Safe Filter Change...............................................................................................................8

Pre‑Filter Change ................................................................................................................9

HEPA Filter Change ...........................................................................................................10

Illustrated Parts Breakdown...............................................................................................11

Limited Lifetime Warranty Terms And Conditions ..............................................................14

Summary of Contents for WH-105-4

















Reviews: