background image

Brad Clayton
President
Clayton Associates, Inc.

Place of Issue: Lakewood, New Jersey, USA November 23, 2018 

Repair or Warranty Contact

 

Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084

WGX-4 

www.DustlessMadeSimple.com

 • 

[email protected]

Page 16

EC DECLARATION OF CONFORMITY

Clayton Associates, Inc. of 1650 Oak Street, Lakewood New Jersey 08701 U.S.A. declare on our own responsibility that the 

following equipment:

Industrial HEPA Filtered, Electrically Powered Vacuum Cleaners

•  Vacuum Models (where XXXX is the Tank Model):

WGX‑XXXX‑0, WGP‑XXXX‑0, WTX‑XXXX‑0, WTP‑XXXX‑0

WGX‑XXXX‑1, WGP‑XXXX‑1, WTX‑XXXX‑1, WTP‑XXXX‑1

•  Tank Models: 

115G,115T,205G, 205T, 215G, 215T

•  With serial numbers ranging from 

WH0000001

 through 

WH9999999

Were tested to verify the integrity of the HEPA filter and the assembled machine.

Test Procedure:

•  The test was performed using an aerosol generator and a photometer.
• 

The system was challenged with 18 microliters/mᶟ Poly Alfa Olefin (PAO).

• 

The system was fitted with a HEPA filter, part number 627‑12H having a certified minimum efficiency of 99.995%.

Test Results:

• 

The filtration efficiency of the assembled WartHog vacuum was 99.9978%

•  Test performed at: 740 Driving Park Avenue, Rochester NY 14613 USA

Declaration:

• 

The assembled unit meets the standard for US HEPA filtration and EU H14.

Summary of Contents for WartHog WGX Series



















Reviews: