Repair or Warranty Contact
Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084
WGP-0
Page 9
1. Connect the compressed air source.
• Verify the power switch on the vacuum is in the OFF position.
• Connect a compressed air line coupler to the Compressed Air Plug (Air In) on the power head.
• Connect the other end of the compressed air line to the compressed air source.
2. Attach a vacuum hose or combination air/vacuum work hose.
• Open the Inlet Port on the vacuum tank.
• Insert the metal sleeve of the vacuum hose into the Inlet Port on the vacuum tank.
3. Attach the compressed air output hose(s).
• When using a combination air/vacuum work hose, the compressed air output hose is part of the work hose assembly.
•
Insert the compressed air plug into a Compressed Air Coupler (Air Out) port on the power head. The vacuum may activate briefly once
the airline has been connected.
4. Attach a tool (optional).
•
Insert the tool’s compressed air plug into the compressed air output hose coupler. The vacuum may activate briefly once the tool has
been connected.
5. Plug the power head/vacuum into an appropriate outlet.
6.
Activate the vacuum.
• Pneumatic Tool Sync Mode:
This vacuum is equipped with Pneumatic Tool Sync (Auto Mode) which activates the vacuum automatically when a compressed air tool is
activated.
The pass through compressed air connection is required for Pneumatic Tool Sync operation.
–
Toggle the Power Switch to the AUTO position for Pneumatic Tool Sync.
•
Manual On/Off Mode:
This vacuum is equipped with Manual Mode (ON Mode) which activates the vacuum when the power switch is in the ON position.
–
Toggle the power switch to the ON position.
BEFORE EACH USE
