Repair or Warranty Contact
Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084
WGP-0
Page 7
The vacuum has the following Compressed Air Requirements to function properly:
• Compressed air must be clean, dry, and oil free to prevent blockage of the pneumatic system.
•
Compressed air line and fittings must have a minimum diameter of 1/4 in (6 mm).
Compressed Air Plug (Air In)
•
The Vacuum is supplied with a 1/4 in (6 mm) industrial interchange compressed air plug for connection to your compressed air supply.
The Compressed Air Plug may be changed to another nominal 1/4 in (6 mm) style if required.
•
Hold the brass bulkhead fitting with a 1 in (26 mm) open end wrench.
•
Remove the compressed air plug with either a 9/16 in (14 mm) deep socket or open end wrench.
• Install a new compressed air plug.
Compressed Air Coupler (Air Out)
•
The Vacuum is supplied with two 1/4 in (6 mm) brass high flow compatible industrial interchange compressed air couplers.
• This coupler provides convenient pass through compressed air for an air tool connected to the vacuum.
The Compressed Air Coupler may be changed to another nominal 1/4 in (6 mm) style if required.
•
Hold the brass bulkhead fitting with a 1 in (26 mm) open end wrench.
•
Remove the compressed air coupler with a 3/4 in (19 mm) open end wrench.
• Install a new compressed air coupler.
COMPRESSED AIR FITTINGS
