background image

G3 Display 006-00001GF                                             

 

 

2

 

Clayton Power R&D, s.r.o.                                                      006-00001DSF rev.003 

 

IMPORTANT BASIC-INFORMATION  

This  User-Manual  serves  a  guideline  for  safe  and  effective  operation,  for  installation  of 
equipment  and for equipment maintenance. –  It  is therefore obligatory that all persons who 
work on or with the equipment are completely familiar with the content of this manual and 
follow the instructions contained herein. Installation of and work on the product may only be 
carried  out  by  qualified,  authorized  and  trained  staff,  familiar  with  the  locally  applicable 
standards and taking into consideration the safety guidelines and measures.  

  

Attention  

We  from  Clayton  Power  make  every  effort  to  ensure  that  the  information  contained  within 
this  document  are  correct.  However,  our  equipment  is  continuously  being  improved  and 
updated, so we cannot assume liability for any errors which may occur. The information may 
contain errors or inaccuracies and represents no commitment whatsoever.  

 

 

Exclusion of liability  

Clayton Power shall in no event be liable for loss, damages or costs arising from use of this 
Clayton Power product, or in any way connected with faulty installation, improper operation 
or incorrect utilization and maintenance. 

Clayton Power shall in no event be liable for any direct or indirect damages, disablement or 
death on persons who 

-

 

works with or are dependent on Clayton Power products 

-

 

are connected to medical equipment or to any life support system, where Clayton Power 
products is integrated as a component 

Copyright  

The information contained within this document remains the sole property of Clayton Power 
No part of this document may be copied or reproduced in any form or by any means, and the 
information  contained  within  is  not  to  be  communicated  to  a  third  party,  without  the  prior 
written consent of Clayton Power. 

Clayton Power R&D, s.r.o. 

Legionárska 7158 / 5 

911 01 Trencin 

Slovakia 

 

Phone:  +421 322 85 00 11 

Summary of Contents for G3 Display 006-00001GF












Reviews: