Claypaky SHARPY PLUS Instruction Manual Download Page 1

Page: 1 / 16

CD3000

INSTRUCTION MANUAL

SHARPY PLUS

INDEX

Page Contents

2 1. Safety information

3 2. Unpacking and preparation

4 3. Installation and start-up

4 3.1 Installing the fixture

4 3.2 Connecting to manis supply

5 3.3 Connecting the control signal line: DMX / Art-Net

5 3.4 Switching on the fixture and basic SetUp

7 4. Maintenance

7 4.1 Opening the covers

8 4.2 Periodical cleaning

9 4.3 Effects module removal

10 4.4 Cleaning of the filters

12 4.5 Rotating gobos

13 4.6 Battery removal

14 5. Specifications

PRELI

MINAR

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

Summary of Contents for SHARPY PLUS

















Search results

Summary of Contents for SHARPY PLUS

Reviews:

Related manuals for SHARPY PLUS

Brands by name

Popular brands

Claypaky SHARPY PLUS, Instruction Manual

Search results

Summary of Contents for SHARPY PLUS

Reviews:

Related manuals for SHARPY PLUS

Brands by name

Popular brands