8
AXCOR BEAM 300
Periodical cleaning
- Fig. 12
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits.
The frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality
of the working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from lenses and filters. It is recommended that the projector
undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
•
General cleaning of internal parts.
•
Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
•
General visual check of the internal components, cabling, mechanical parts, etc.
•
Electrical, photometric and functional checks; eventual repairs
.
Lower Side
Upper Side
12
Parts requiring frequent cleaning.
