This portable light contains Li-ion batteries. Please follow the user manual before use.
If any abnormality is found in the product, discontinue use and contact the dealer or a service
center where the product was purchased. Any modifications of this product will void the warranty.
Misuse of CLAYMORE products may cause user harm.
3. Operating Manual
●
Charging
1) As shown in the figure, open the cover of the product and connect the USB cable to the charging port.
Charging time may vary depending on battery capacity and external environment.
●
Operation
1) On/Off & Dimming : Push on/off button shortly to turn and off the lantern.
2) Battery Check : Press button once , the battery level is displayed in 4 steps.
3) LED Color Change : When the power is ON, pressing function button once enables adjusting the light color in three
steps in order of Warm > Bright > Cool
●
Power Bank Function
4. Instructions
●
When mounting the lantern on camera tripod
1) Unscrew lantern hook from handle,then mount the handle wire onto the camera tripod to fix it.
2) Adjust the angle of the handle wire or the direction of the tripod to illuminate the desired spot.
●
When hanging on a lantern hook or string
(Press once->LED Color change)
(Press and hold for 2 seconds->SOS Flash)
⑧
Lantern Hook
⑨
Metal Handle
⑥
USB In Port
⑤
LED Light and Diffusion Filter
①
Power Button
②
Dimming Button
④
Battery Indicator
③
Function Button
(LED Color Temperature/SOS Flash)
LED Color Change
SOS-Flash
(Press once->Battery indicator)
Battery Check
1) Turn metal handle to adjust the angle of light in for the desired direction.
Claymore ULTRA + II model offers smart quick charge.
Connect multiple devices with USB cable will automatically start charging.
(On status : Battery indicator turns on)
If power bank is not working, press or button once to activate it. (5V charge)
⑦
USB Out Port
2) When the product is being charged, the battery level indicator flickers. If the light is not flicking and
all the lights are on, it indicates that the battery has been fully charged.
④
Battery Indicator
※
Blinks once when Maximum and Minimum brightness is reached
※
Please charge with the supplied USB cable with 5V 2A / 9V 2A / 12V 1.5A smart quick charger.
USB charger plugs into a
PC or laptop and is compatible with
charging cable for smartphones.
1. Caution
①
Do not use near high temperature such as fires or heating equipments. It may cause explosion and ignition.
②
This product is water resistant. However, if left in the rain for a long time, it may malfunction.
If the product accidentally gets sunmerged in water, please quickly wipe it off
③
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
④
Do not touch the light source directly as it may become very hot during use. Use handle to carry out.
⑤
Do not use when it exceed the operating temperature range (-10 ° C to 40 ° C).
⑥
Do not use external power other than USB 5V. It may cause heat and ignition.
⑦
Please do not place in the reach of infants. It may cause swallowing of parts or injury.
⑧
Parental supervision is necessary when the product is being used by children.
Misuse of light may cause injury or electric shock.
⑨
Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock.
⑩
Do not disassemble or modify the product.
⑪
Do not touch the connector with wet hands. There is a danger of electric shock.
⑫
After use, be sure to turn off the power.
⑬
Dropping or impacting the product can cause damage to the internal components of the product,
resulting an unexpected failures in normal use. Be careful not to apply impact to the body.
2. Parts & Components
●
When making the lantern stand up on a flat surface
1) You can place the lantern vertically or horizontally
when configuring the lantern on a flat surface.
2) Turn the
⑨
metal handle to adjust the angle of lighting and
place it on a flat surface to obtain desired lighting direction.
Angle
Adjustment
(0˚>45˚>90˚)
4) SOS-Flash: Press and hold button for 2 seconds from ON states to activate the SOS distress signal.
Press button once again to stop SOS flash.
* Charging time may vary depending on battery capacity of
different devices.
Press once -> Activate power bank function
Warm
Bright
Cool
LED light with low color temperature, warm light feels like ordinary gas lantern
LED light with a neutral color of daylight and light bulb and comfortable feeling
LED light with high color temperature, cool light feels like ordinary fluorescent light
- Stepless Dimming
Press and hold button to increase brightness. Press and hold button to decrease brightness.
- 5 Step Dimming
Push button shortly to increase brightness. Push button shortly to decrease brightness.
※
When the battery capacity is less than 4%,
Battery check and power bank functions may not activate.
Battery Indicator
Charging
0~25%
25~50%
50~75%
75~100%
Fully Charged
Fully Charged
Flickers
Stop
Flickers
Stop
※
When Charging
Battery Indicator
Charging
0~50%
50~100%
※
When Using
INPUT
⑥
⑦
