rogerseller.com.au
Specifications
It is a requirement of State Plumbing Codes that licensed plumbers carry out all tapware installations. All
installations should comply with the relevant requirements of AS/NZS 3500 and local plumbing codes.
Care and Maintenance
[1] Product should be inspected for surface damage prior to installation. [2] Cleaning and handling of all
finishes must be performed carefully. [3] Clean products using a soft cloth with warm soapy water only. [4]
Never use harsh detergents or abrasive cleaners as these will damage the product. [5] Water marks can be
removed from Matt Finishes with an application of a carnauba wax based non-abrasive polish on a microfibre
cloth. [6] Do not use undue pressure when cleaning and wipe in one direction only. [7] Contact with harsh
chemicals such as hair dye, hair bleach etc will result in damage to the finish. [8] Tapware should never be
installed using acetone silicones. [9] Avoid the use of wax based furniture creams as this can result in a
build up of deposits which will detract from the appearance. [10] Damage to finishes arising from improper
installation or post installation use or failure to observe the above care and cleaning instructions will void all
warranty agreements.
Warranty
Rogerseller tapware, bathroom fittings and sanitary ware are covered by a five (5) year warranty from date of
purchase. For full terms and conditions please refer to rogerseller.com.au
Rogerseller Showrooms —
Melbourne
173-177 Barkly Avenue
Burnley VIC 3121
P
03 9429 8888
Sydney
18 Danks Street
Waterloo NSW 2017
P 02 8396 8700
Brisbane
74–76 McLachlan Street
Fortitude Valley QLD 4006
P 07 3251 4333
Concept Stores —
Southern Innovations
(
Fishwick ACT)
P 02 6143 2666
Southern Innovations
(
Mitchell ACT)
P 02 6129 7666
Southern Innovations
(Albury NSW)
P 02 6022 2777
Routleys Plumbing Innovations
(Malvern SA)
P 08 8291 3000
