1.2
.2
2
Installation, Warranty and Care
If you require any further assistance regarding specification data and technical advice please contact
us at [email protected]
B O U R N B R O O K BA S I N TA P
ASSEMBLY INSTRUCTIONS
TECHNICAL FILE
FOR ASSEMBLY FOLLOW THE INDICATIONS OF THE DRAWING
INSTALLATION RECOMENDATIONS
Before installing a tap, it is good to rinse the supply pipes to
remove all residues. We also recommend installing the taps with a
filter. The installation of the tap must be done with the surface
clean and dry. to perform the water pressure test, the taps must be
open.
CLEANING AND MAINTENANCE
Cleaning must be done with liquid soap and water. Do not use
liquid detergents containing abrasive or acidic substances,
abrasive sponges or disinfectants. Incorrect cleaning may
permanently ruin the surface of taps.
On color finishings, do not use products containing alcohol,
acetone and other solvents.
WARRANTY
WE guarantees all its products in case of manufacturing defects, as
follows:
5-year warranty:
- Fusion or porosity defects;
- Cartridge defects (the wear of this component depends on water quality);
- Chrome plating defects (defects caused by maintenance errors
are excluded, please refer to cleaning instructions).
1-year warranty:
- O-rings or fittings defects.
- Defects on remaining finishes.
In order to use this warranty, please keep the invoice and attach it
to this document.
Warranty grants the right of free replacement of parts that cause
an irregular operation due to manufacturing defects, in every cases
in which malfunction is not caused by incorrect use, maintenance
errors, irregular installation, assembly made by unqualified people
or reasons of force majeure.
Defective products must be sent to WE, with shipping expenses
borne by the sender – this warranty document and a copy of the
purchase invoice must be attached to the package – where the
products will be promptly replaced and send back with shipping
expenses borne by WE
Non-compliance of this conditions will render the warranty null and void.
This warranty excludes any liabilities on the consequences arising
from use or installation defects of WE products.
TECHNICAL DATA
REFERENCE
DESCRIPTION
01
____
V SPOUT (105mm)
02
____
COUNTERTOP PLATE
03
____
O-RING
04
____
1/2” CONNECTION THREADED
05
____
O-RING
06
____
LOCK NUT
2
MIN. 12MM / MÁX. 48.5MM
1
3
5
4
6
I
NSTALLATION RECOMENDATIONS
Before installing a tap, it is good to rinse the supply pipes
to remove all residues. We also recommend installing the
taps with a filter. The installation of the tap must be done
with the surface clean and dry. To perform the water
pressure test, the taps must be open.
CLEANING AND MAINTENANCE
Cleaning must be done with liquid soap and water. Do
not use liquid detergents containing abrasive or acidic
substances, abrasive sponges or disinfectants. Incorrect
cleaning may permanently ruin the surface of the taps.
On colour finishings, do not use products containing
alcohol, acetone and other solvents.
WARRANTY
Claybrook Studio guarantee all its products in case of
manufacturing defects, as follows:
5 year warranty:
- Fusion or porosity defects;
- Cartridge defects (the wear of this component de
pends on water quality);
- Chrome plating defects (defects caused by main-
tenance errors are excluded, please refer to cleaning
instructions).
1 year warranty:
- O-rings or fittings defects.
- Defects on remaining finishes.
In order to use this warranty, please keep the invoice and
attach it to this document.
Defective products must be brought to the attention of
‘Claybrook Studio’, with shipping expenses borne by the
sender – this warranty document and a copy of the pur-
chase invoice must be attached to the package – where
the products will be promptly replaced and send back
with shipping expenses borne by ‘Claybrook Studio’.
Non-compliance of this conditions will render the war-
ranty null and void.
This warranty excludes any liabilities on the consequences
arising from use or installation defects of ‘Claybrook Studio’
products.
