16)ACC.VOL
Press [-ACC.VOL+] buttons to adjust the accompaniment volume: 0-127.
(
see page 26)
.
17). P
B
ITCH
END
1) The PITCH BEND wheel is located on the left side of your keyboard which can be used
to vary the pitch of the keyboard. Pushing the wheel away from you will cause the keyboard
pitch to go sharp, and pulling the wheel towards you will cause the pitch to be lowered.
2) Moving the wheel to the top position (Away from you) and holding it there for about 2
seconds, will allow you to set the PITCH BEND SENSITIVITY, the LCD will display the
current pitch range (pitch sensitivity). You can modify this sensitivity from 1~12 semitones,
by using the rotary data dial to set the pitch sensitivity. When the power is turned ON, the
preset sensitivity is +/- 2 semitones. (Hint: Pitch bend is often used by orchesteral players,
when playing Trombone / Trumpet / Clarinet).
18). MODULATION
The modulation function applies vibrato effects to the voices played on the keyboard.
Push the wheel to the MIN, the voices will play in normal.(Hint - This modulation wheel
should be set to minimum position for normal playing, and used conservatively Some sounds
such as Piano are not suited to modulation at all. )
PITCH BEND
UP
DOWN
MODULATION
MAX
MIN
17
USB VOL
8va
8va
ACC
PHR2
PHR1
PAD
CHORD2
CHORD1
BASS
RHY2
RHY1
augsus4
13
5
9
11
7
m M
6
dim
ACC
O.T.S
METRONOME
PORTABLE GRAND
DSP
SUSTAIN
TOUCH
TRANSPOSE
TEMPO
MEASURE
CHORD
HARMONY
DUAL
SPLIT
VOICE
DEMO
STYLE
REVERB
CHORUS
MIDI IN MIDI OUT
FREEZE
TWIN
U DISK
DUAL
NORMAL
DEFAULT POSITION FOR PITCH BEND:Wheel is in the middle (Spring loaded).
DEFAULT POSITION FOR MODULATION:Wheel is set to bottom position (This wheel is
not spring loaded and will remain where it is positioned by the player).
