Program & Controller dumps
To dump a Program Sys Ex, or MIDI Controller data via MIDI, either
to another Nord Piano 2 or for recording the data into another MIDI
device, proceed as follows:
Sending program dumps
1
Connect the MIDI Out on the Nord Piano 2 to the MIDI In on the
receiving device (or use the USB capabilities).
2
Set up the receiving device to accept MIDI Sys Ex and MIDI
Controller data.
3
Press Shift + MIDI and select the “Dump One” or “Dump All” menu
item using the Up/Down buttons.
4
If needed, set the receiving MIDI device to “recording mode”.
5
Press the Store button to send the dump to the MIDI Out of Nord
Piano 2. The display will inform you when the transmission has
been completed.
M
All program parameters will be sent but NOT the actual piano or
sample sounds.
When dumping back a program that uses a piano sound, make sure
the actual piano are also available in the Nord Piano 2. Otherwise the
parameters in the Sys Ex message will be applied to another available
piano instrument.
Sending MIDI Controller dumps
1
Set up as in steps 1 and 2 in the preceding description.
2
Press Shift + MIDI and select the “Send CC” menu item using the
Up/Down buttons.
3
Press the Store button to send the dump to the MIDI Out of Nord
Piano 2. The display will inform you when the transmission has
been completed.
Receive MIDI SysEx dumps
Here is how to receive a MIDI SysEx Dump:
1
Connect the MIDI Out on the transmitting device to the MIDI IN on
the Nord Piano 2.
2
Initiate the transmission on the transmitting device.
If the dump contained all Programs (All), it will replace all programs cur-
rently stored in the Nord Piano 2. If the dump contained only a single
program, it will be temporarily placed in the currently selected program
memory location.
An asterisk will appear in the display to in the upper, left area next to
the program number to indicate an unsaved edit. You then have to
store the program manually to a memory location using the Store func-
tion (see page 14).
MIDI Controller list
These are the MIDI Controller numbers used for all the knobs and the
buttons on the Nord Piano 2 front panel:
Nord Piano 2 Parameter
MIDI
Controller
Kbd Split
14
Transpose
15
Kbd Touch
33
Sustped Off
34
Piano Level
106
Piano Type
12
Piano Model
44
Piano On/Off
46
Clav Model
45
Acoustic Model String Resonance/Release
79
Acoustic Model Pedal Noise
78
Piano Octave Shift
105
Synth Level
51
Sample Select
52
Synth Attack
53
Synth Release
54
Synth On/Off
55
Synth Octave Shift
56
Effect 1 Rate
63
Effect 1 Type
60
Effect 1 On/Off
69
Effect 1 Source
70
Effect 2 Rate
62
Effect 2 Type
61
Effect 2 On/Off
80
Effect 2 Source
71
Delay Mix
75
Delay Feedback
76
Delay On/Off
84
Delay Source
85
EQ On/Off
115
EQ Treble
113
EQ Mid
116
EQ Mid Freq
117
EQ Bass
112
EQ Source
118
Amp/Comp On/Off
86
Amp/Comp Amount
111
Amp/Comp Sel
81
Amp/Comp Source
87
Reverb Wet/Dry
102
Reverb Sel
96
Reverb On/Off
97
Sustain pedal
64
Soft pedal
67
Sostenuto pedal
66
Volume Pedal
11
ChaPter 9 Midi | 23
Summary of Contents for Nord Piano 2 HA88
Page 27: ......