8 | NordLead4UserMaNUaLv1.3x
Buttons
On/Off buttons
On/Off buttons are used for activating a parameter
or a group of parameters such as effects . The LED
next to them indicates the On or Off status .
Shift button
Quite a few buttons have a secondary function,
which will be available if you hold down Shift while
pressing the button . The name of the secondary
function is printed below the button .
Selector buttons
Selector buttons are used to activate a
setting in an array of two or more .
Selector buttons have a set of round or
triangular LEDs to indicate the current
setting . Press the button several times
to cycle through the possible options .
Another example of a selector button can be found
in the LFO 1 section, this one has additional settings
that are activated with Shifty . Hold Shift and press
this button repeatedly to activate the master clock,
the arpeggiator or both of these functions, as indi-
cated below the button . The LFO 2 and Modulation
Envelope, the Oscillator 2 waveform selector and the Delay Feedback/
Reverb algorithm are other examples of this functionality .
Master Clock (Mst Clk)
The Mst Clk button can be used to set a tempo in two
different ways . Tap the button in the tempo you wish to
use . The current tempo in BPM will be shown numeri-
cally in the Display, and the beats detected in your taps
will be indicated with three dots in the lower part of the display .
Hold down the Mst Clk button, and set a tempo by turning the Pro-
gram Dial .
Copy
The functionality of Copy/Morph Lock button depends
on the situation when it is used . Hold it and turn a knob
to copy that knob’s value to a virtual clipboard, and
also to show the parameter value in the Display .
Hold down a Continuous Morph, Impulse Morph or Slot button and
press Copy to copy the entire Morph setting or Slot setting (the actual
program) to the clipboard .
Morph Lock
If you hold a Continuous or Impulse Morph button and press Copy/
Morph Lock, Morph Lock is activated and you can set up the Morph
without having to keep on holding the Morph button . Morph Lock is
indicated with blinking green LEDs above the Continuous or Impulse
Morph buttons .
Morph Lock can also be used to latch an Impulse Morph, to be able to
have the Morphed settings of the sound instead of the original .
Paste
To Paste the content of the clipboard, hold Shift, then the Copy/Morph
Lock and finally turn the knob or press the corresponding Morph or
Slot Button to paste the settings . The pasted setting will be shown in
the display when a single parameter is pasted .
Summary of Contents for Nord Lead 4
Page 55: ......