Clavia DMI
Service manual Nord Electro rev. 1.2
Page 7
Error Codes
BootPROM error codes:
E.0 Recv SysEx error (overflow or other low level error)
E.1 Recv begin error (SysEx begin message error)
E.2 Recv data error (SysEx data message error)
E.3 Recv end error (SysEx end message error)
E.4 OS erase error (can't erase OS in Flash)
E.5 OS write error (can't write OS to Flash)
E.6 No OS detected (no OS in Flash)
E.7 OS load error (OS with errors in Flash)
E.8 Flash init error (can't init Flash chip(s))
E.9 Flash unknown (unknown Flash chip(s))
Piano init error codes:
P.1 Invalid or missing file
P.2 Map file main type is invalid
P.3 Invalid file(s)
P.4 Invalid file(s)
P.5 Invalid file(s)
P.6 Invalid or missing file
(Hold [instr. select] at power up to init piano without loading samples.)
USB download error codes:
F.1 Initial USB transfer checksum error.
F.2 Flash Error: Create file error.
F.3 Flash Error: Write file error.
F.4 Communication Error: Data overflow.
F.5 Communication Error: Data underflow.
F.6 Communication Error: Verification error.
F.7 Flash Error: Failed to calculate flash checksum.
F.8 Flash Error: Checksum error.
F.9 Flash Error: Close file error.
F.a USB Error: Internal error.
F.b --- error code not used ---
F.c USB Error: PID encoding error.
F.d USB Error: PID unknown.
F.e USB Error: Unexpected packet.
F.f USB Error: Token CRC error.
F.G USB Error: Data CRC error.
F.h USB Error: USB chip error.
F.J USB Error: Unexpected EOP.
F.n USB Error: Sent/received NAK.
F.o USB Error: Sent stall.
F.P USB Error: Overflow error.
F.r USB Error: Bitstuff error.
F.t USB Error: Invalid data PID.
F.y USB Error: Unknown error.
Summary of Contents for Nord Electro 2
Page 1: ...SERVICE MANUAL...
