Clavia Nord C1, Service Manual

Page: 6 / 13

Clavia DMI Service manual Nord C1 Combo Organ rev. 1.0 Page 5
Available tests are:
[ prog ] Main board
1
.
bd
Mainboard Performs test 4,5,7
2 . Fn
Final Only used in production
3 .
Ht
Heat Only used in production
4
.
ds
DSP Tests the two DSP´s, including external memory.
5 . EP
EEPROM Performs a quick test of the EEPROM.
6 . EP .
EEPROM Long Tests the entire EEPROM.
7 . FL
Flash Performs a quick test of the Flash circuits.
Flash data is not altered.
8
.
FL
.
Flash Long Tests the entire Flash memory area.
Flash data is not altered.
9
.
ni
MIDI Tests MIDI communication. Connect a MIDI cable from MIDI in
to MIDI out and then to Bass Pedal MIDI.
Successful test is presented as
O__O
A
.
yb
Keyboard Press one key at a time. Test counts number of keys pressed.
Upper and lower switch is indicated by the dots in the display
b
.
Pd
Pedal Tests the function of the pedal inputs.
To fully test the Rotor control a half moon switch must be used.
Sustain Rotor Swell
P pressed F fast C connected
r
released
S
slow
C . LE
Leslie Only used in production
d
. AU
Audio Only used in production
[ Live 1 ] Panel board
1
.
Pn
Panelboard Performs test 2-3
2 .
bt
Button Tests the function of all the buttons
3 . Ad
ADC Tests the function of the A/D converter on the panel board.
Knobs incl. swell pedal
[ Live 2 ] System
1
.
Sn
Serial no. Read the serial no. by pressing [on] - [soft] - [fast] - [third]
buttons in the percussion section of the panel board.
2
.
CS
Checksum Only used in production
3 . EF
Erase Flash Will set all data in Flash to “1”
4
. CL
Clear EEPROM Will set all data in EEPROM to “0”