15
61000663 Iss 03
6.4 Controller
The Electronic base unit is pre-installed inside the
air curtain. All the external electrical connections
are via screw terminals onto this base unit.
The program keypad is installed on a separate
facia plate and connected to a surface mounted
back box in a suitable location. Please see Figure
5.
Alternatively, the program panel can be flush wall
mounted with the addition of a suitable conduit
box MK part number 861 ZIC or equivalent.
The distance between the base unit and the
program panel can be up to 50m maximum.
6.5 Installation Wiring
With case removed, connect the electrical supply
and program panel interconnecting wiring to the
appropriate terminals on the controller base unit
(See relevant wiring diagram section 4)
Cable
Entries
13.35
43.5
87.0
60.3crs
Figure 4. Surface mount location holes
Figure 5. Alternative conduit box
WARNING:
THIS AIR CURTAIN SHOULD NOT BE
INSTALLED WHERE THERE IS A
CORROSIVE ATMOSPHERE.
