59
ES 3643_IM
02.03.16
Problem
Possible cause
Solution
The pump is
noisy.
Switch the appliance off.
The water tank is
empty.
Fill the water tank
with fresh water.
The water tank
is not properly
attached; the valve
is not open.
Press the tank
slightly down for the
valve to open.
Air entrapped in the
water circuit.
Bleed the appliance
as instructed under
“First Use / Bleed
-
ing”.
Espresso
escapes at the
filter holder
edge.
Stop the brewing process!
The filter holder
is not properly
attached or is not
enough closed.
Attach the filter
holder properly as
instructed under
“Attach / Detach
Filter Holder”.
Too much coffee
grounds in the filter
insert.
Remove excess
coffee grounds.
Observe the MAX
marking in the filter
insert.
Coffee grounds
residues on the
rubber seal of the
group head.
Switch the appli-
ance off and let it
cool down.
Clean the rubber
seal as instructed.
After preparing milk
foam, the appliance
is still under
pressure.
Release the pres-
sure completely.
Pay attention
to item 4 of the
chapter “Making
Espresso”.
Espresso is too
cold.
The cups were not
pre-heated.
Rinse the cups with
hot water.
Indicator lamp “
ok
”
does not light up
during the brewing
process.
Wait until the
indicator lamp “
ok
”
lights up.
Coffee crema
is slightly
discoloured
(coffee runs out
fast).
The coffee grounds
are too coarse
or are not evenly
spread.
Use the supplied
tamper.
Too little coffee
grounds in the filter
insert.
Fill coffee grounds
only to MAX
marking in the filter
insert.
Problem
Possible cause
Solution
Coffee
crema is dark
discoloured
(coffee runs out
slowly).
The coffee grounds
are too fine or
compressed too
much.
Loosen the coffee
grounds. Spread
it evenly and only
slightly compress
with the tamper.
Too much coffee
grounds in the filter
insert.
Use less coffee
grounds. Observe
the MAX marking in
the filter insert.
No crema on
the espresso.
The espresso
grounds are not
suitable.
Change the brand,
if necessary.
The milk does
not froth.
The milk is not
suitable.
Use milk with at
least 3.5 % fat
content.
The milk is not cold
enough.
Use refrigerated
milk.
The steam nozzle
is dirty.
Clean the steam
nozzle as instructed.
The appliance
turns off auto-
matically.
This is
not
a
malfunction of the
appliance.
In order to
comply with the
Ecodesign Directive
(2009/125/EC), the
appliance turns off
automatically after
max. 30 minutes
after the brewing
process has
finished.
Technical Data
Model:..........................................................................ES 3643
Power supply:
............................................. 220 - 240 V~, 50 Hz
Power consumption: .......................................................850 W
Protection class: .......................................................................
Pressure: ......................................................................... 15 bar
Net weight: ..........................................................approx 3.1 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.
Summary of Contents for ES 3643
