GB
30
Electrical Connection
• Ensure that the machine is switched off (all operating switches on „MIN“).
• Before inserting the mains plug into the socket check whether the voltage
which you intend to use corresponds to that of the machine. Please see the
label on the machine for details.
• Only connect the machine to a correctly installed safety socket, 230 V/50 Hz.
• Adjust the temperature control to the desired temperature. The red control
lamps light up.
• Once the set temperature has been reached the control lamps go off. During
operation the control lamp goes on from time to time to show that the correct
temperature is being maintained.
Operation
Use of the Hot Plates
1. Only use saucepans with a fl at bottom in order to make optimum use of the
energy (see diagram 1).
2. The saucepan should never be smaller than the hot plate. This wastes energy.
In extreme cases the hot plate may deform.
3. Set the temperature control according to what you intend to do:
Level MIN:
Off
Level 1:
Keeping warm/continued cooking
Level 2:
Continued cooking
Level
3:
Frying
Level 4:
Parboiling, gentle roasting
Level MAX:
Roasting, rapid heating
Switching-Off
The machine is switched off if all switches are in position „MIN“. Then remove the
mains plug.
Summary of Contents for DKP 2913 E
Page 44: ...RUS 44...
Page 45: ...RUS 45 5 MIN 230 50 1 1 2...
Page 46: ...RUS 46 3 MIN 1 2 3 4 MAX MIN 30...
Page 47: ...RUS 47...
