Vertical Steam
This can be used to produce a jet of steam in a vertical direction.
Self-Cleaning (Self-Clean)
1. Half fill the water tank with water.
2. Heat the machine up to its maximum temperature. After the control lamp goes
off remove the machine from the mains supply.
3. Now hold the device horizontally over a sink. The steam regulator (5) must be
kept in the "Self Clean" position. Now rock the device backwards and forwards
until the tank is empty. Then return the regulator to the
0
position.
4. Place the machine back on its stand and heat it up again. To clean the base
now iron over a clean cotton cloth.
Cleaning and Storage
•
Always remove the mains lead before cleaning!
•
Clean the casing with a slightly damp cloth.
•
Clean the iron with a slightly humid cloth.
• Always return the steam regulator to the "
0
" position after use and empty the
water tank in order to prevent any leaks.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascriba-
ble to material or manufacturing defects will be eliminated free of charge by repai-
ring or, at our discretion, by replacing it. The guarantee services do not entail an
extension of the life of the guarantee nor do they give rise to any right to a new
guarantee!
Proof of the guarantee is provided by the proof of purchase. Without proof of
purchase no free replacement or repair will be carried out.
If you wish to make a claim under the guarantee please return the entire machine
in the original packaging to your dealer together with the receipt.
34
GB
5....-05-DB 2879 24.03.2004 9:22 Uhr Seite 34
