E
N
G
LI
S
H
ENGLISH
20
Damper
Open the damper on the hose handle to adjust the airfl ow or to
release objects clinging to the nozzle.
Filter
Your vacuum cleaner has three fi lters.
1. Main fi lter (in the dust container):
• As your vacuum cleaner has a fi lter which you can remove
and wash, there is no need for you to purchase replacement
dust backs.
• Open the dust container. Take out the fi lter insert. Empty the
contents of the dust container and clean the main fi lter by
knocking it against an object.
• Stubborn dirt can be removed by passing water against the
direction of airfl ow through the fi lter fabric.
• Only replace the fi lter insert when it is completely dry!
2. Motor protection fi lter (inlet fi lter):
• The inlet fi lter is located in the dust container.
• The
fi lter is in a vertical position in the rear section of the
dust housing.
• Pull the fi lter out at the front. Clean the motor protection
fi lter approximately every tenth time the vacuum cleaner is
emptied. If necessary, the fi lter can also be washed in warm
water without any additives.
• Place it back into place only once it is completely dry!
3. Outlet fi lter:
• The appliance is also equipped with an outlet fi lter.
• You will fi nd this fi lter on the right-hand side of your vacuum
behind a ventilation grid.
• Open the ventilation grid by pulling the lever above the
ventilation grid.
• Remove the fi lter and clean as described above.
• Fit the fi lter back into place and close the ventilation grid by
following the steps above in the opposite order.
Cleaning and storage
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Clean the motor protection fi lter approximately every tenth
time the vacuum cleaner is emptied. Clean the fi lter in hot
water without additives. Put it back into place only once it is
completely dry.
Storage
• Wind the cable completely.
• Insert the hook on the nozzle into the rear of the device.
Technical Data
Model: ..............................................................................BS 1253
Power supply: ............................................................230 V, 50 Hz
Power consumption:
P
nom.
: ............................................................................1200 W
P
max.
: ............................................................................1600 W
Protection class: ..........................................................................
ΙΙ
Net weight: ........................................................................3,40 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
05-BS 1253 Neu.indd 20
05-BS 1253 Neu.indd 20
20.11.2008 14:10:06 Uhr
20.11.2008 14:10:06 Uhr
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 78.0 dB(A) (no limit)
