Classique CLO67XLSS, User Manual, Page: 6 / 31

4
Installation
Electrical connection
WARNING: THIS APPLIANCE MUST BE EARTHED.

This appliance should be wired into a 16 A double pole switched fused spur outlet, having
3 mm contact separation and placed in an easily accessible position adjacent to the
appliance. The spur outlet must still be accessible even when your oven is located in its
housing to enable the appliance to be disconnected from the mains supply.

To connect the oven power cord, loosen and remove the cover on the terminal block, in
order to gain access to the contacts inside. Make the connection, securing the cord in
place with the cable clamp provided and then immediately close the terminal block cover
again.

If you have to change the oven power cord, the earthing (yellow/green) conductor must
always be 10 mm longer than the line conductors.

Care must be taken to ensure that the temperature of the mains supply cable does not
exceed 50°C.

If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement which can be obtained from the Spares Department.