Classic Duo 2, Installation & Operator'S Manual

Page: 7 / 20

Gravity drain machine
•
Flexible waste hose must
be securely attached to
the waste outlet elbow on
the rear of the machine.
•
The waste hose must
flow down from the waste
outlet elbow to the drain.
•
Ø
35mm (
Ø
1 ¼”) stand-
pipe required, must be
lower than the baseline
of the appliance
•
H800 standpipe must be
a minimum of 75mm (3”)
below the baseline of the
appliance.
•
Hose to be a close / tight
fit into the drain pipe to
reduce odours from the
drain system
4
4
.
.
0
0
C
C
o
o
m
m
m
m
i
i
s
s
s
s
i
i
o
o
n
n
i
i
n
n
g
g
4.1 Rinse aid & detergent :
Ensure chemical tubes are attached correctly to the individual chemical
pumps (pumps located behind front lower panel of the appliance).
At the bottle end of the chemical tubes, slide the bottle weight onto the
tube, now place the tube and bottle weight into the correct chemical
bottle.
Ensure the correct chemical tubes now go to the corresponding chemical
bottles.
WARNING : Only rinse aids and detergents developed for commercial
glass and dishwashers are to be used, rinse aids must be suitable for
water temperatures down to 40°c.
Page 5