w w w . c l a s s i c
e x h i b i t s . c o m
Step 3
Page 3 of 3
866.652.2100
© 2014
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - Workstation Assembly (Cont’d)
When assembled
Part Number
G
Steps:
1) Slide connection bar into lower leg assembly. Slide upper vertical over bar and secure both.
2) Attach monitor mount to vertical as shown in detail below.
Description
Curved Montior Mount Extrusion
G
Hex Key Tool
V20
Adjust V20 connector to
desired location.
Then remove screws.
Place mount plate
in front of V20 connectors.
Then secure with screws.
NOTE: Monitor mount should be installed
while laying down on floor
Monitor Mount Attachment
Vertical Connection Bar -
Slide connection bar into
lower leg assembly. Slide
upper vertical over bar and
secure both as shown.
