PIANO
FUNCTION
SHIFT
16
Function Menu
The option and parameters are as follows:
Press and hold the [SHIFT] button and then press the [FUNCTION]
button to enter function menu. The LCD displays the default “Tune”
function menu option. Use [+/YES]/ [-/NO] button to set parameter of
the current menu.
6
12
No.
2
3
1
13
11
4
9
8
10
7
5
Tune
Chorus Type
Chorus Level
EQ Type
Harmony Types
Content
Beat Type
Split Point
Pedal Type
Reverb Type
Reverb Level
MIDI Transmit
MIDI Receive
Auto Power Off
LCD display
XXX Tune
XXX Split pt
XXX Beat
XXX Rev Lev
XXX Chr Lev
XXX EQ XXX
XXX ChrGMCr2
XXX Midi Out
XXX PowerOff
XXX RevHall1
XXX HrmDuet
XXX Ped XXX
XXX Midi In
Ped Sust，Ped Soft，Ped St/S，Ped Mem
Range
1－61
-50 ~ +50
0， 2－9
EQ Pop，EQ Rock，EQ Class，EQ Jazz，EQ Dance，EQ Reset
RevHall3，RevChrh1，RevChrh2，RevDelay，RevPnDly
ChrFlgr2，ChrRtry1，ChrRtry2
ChrChrs1， ChrChrs2，ChrGMCr1，ChrGMCr2，ChrFlgr1，
0－32
HrmCtTri，HrmBlock，Hrm4Cls1，Hrm4Cls2，Hrm4Open，
30，60，OFF
HrmDuet，HrmStdTri，HrmFulCd，HrmRkDut，HrmCtDut，
01－16
01－16, ALL
RevRoom1，RevRoom2，RevRoom3，RevHall1，RevHall2，
Hrm1+5，HrmOctv1，HrmOctv2，HrmStrum
0－32
Default
0
19
4
EQ Reset
Ped Sust
RevHall1
ChrGMCr2
23
0
HrmDuet
01
ALL
30
2.
Press [+/YES] and [-/NO] buttons simultaneously will set the tune
Note:
[FUNCTION] button to select split point menu. The LCD displays
The function menu status will exit if no operation is done within 5
seconds.
Tune
This function sets the pitch of entire keyboard by steps of cents.
[FUNCTION] button to select the tune menu. The LCD displays
“xxx Tune”.
Use [+/YES]/ [-/NO] button or data dial to change tune value. Its
1.
Press and hold the [SHIFT] button and then repeatedly press the
range is from -50 to 50 cents.
3.
The setting is applied to both accompaniment and the voice.
Split Point
This function sets the point which separates the entire keyboard to
two sections:
value to its default setting: 0.
1.
Press and hold the [SHIFT] button and then repeatedly press the
“xxx Split Pt”. Use [+/YES]/ [-/NO] button or data dial to change
Split Point. The range of Split Point is: 1~61, press the [+/YES] and
2.
Press [+] and [-] buttons simultaneously will set the split point value
to its default setting.
Note:
The Split keys belong to the left hand area.
[-/NO] buttons to restore its default setting.
Tune
SPlit
Pt
PIANO
FUNCTION
SHIFT
/ NO
/ YES
PIANO
FUNCTION
SHIFT
/ NO
/ YES
