Instructions:
Generator Cover
do not iron
do not
pack wet
do not
use soap
line dry
no bleach
water
resistant
no tools
required
WARNING!
Do not operate the generator with the cover on.
CAUTION!
Let your generator cool before you put the cover on.
Installation
Check your generator to make sure there are no sharp objects or corners that
could stress your cover as you pull it on. Open the panel attached with hook
and loop tabs and slip your cover over your generator with this panel to the
back. Close the cover by aligning the hook and loop tabs together. Fit handles
through the provided openings in the upper back corners then close the back panel
underneath them.
Use and Storage
Your Generator Cover has an integrated storage bag. To fit your cover in the bag fold and roll it tightly
rather than stuffing it. Never store a wet cover in the storage bag or confined area as the cover can be
damaged by mildew.
Cleaning and Care
Clean your cover with a soft brush and luke-warm water. DO NOT USE SOAP as it may remove the
protective coatings added by the factory. Air dry.
79527
-SC,
79537
,
79547
,
78602700
,
78602800
,
78602900
12
cH
54
_
13097
CLASSIC ACCESSORIES, INC., KENT, WA USA
98032
©
2012
cla ssic accessor ies.com
